Small Joystick Boot (VCSO, VCS2 & CS1)
part #: 01.001
Small rubber boot for VCS2, CS1, VCSO, VCS2 and Pro-4 joysticks.
Small Aluminum Nameplate (2.84" x 2.84")
part #: 01.003
Black aluminum 2.84" x 2.84" (72 mm x 72 mm) nameplate.
Standard Push Button Actuator
part #: 01.068
Actuator for standard flush or recessed push button handle configurations.
Brass Sealing Ring
part #: 01.070
Brass sealing ring for flush/recessed push button standard handles.
Flush Push Button Handle Cap
part #: 01.071
Handle cap for flush push button HD handle configurations
Recessed Push Button Handle Cap
part #: 01.071.1
Handle cap for recessed push button HDV handle configurations.
Extended Push Button Actuator
part #: 01.073
Actuator for standard extended push button handle configurations.
Light Return Spring (VCSO, VCS2, & CS1)
part #: 01.151
Light return spring for CS1, VCSO, and VCS2 joysticks.
Standard Return Spring (VCSO, VCS2, & CS1)
part #: 01.304
Standard return spring for CS1, VCSO, and VCS2 joysticks.
Small Rubber Boot (MO & M2)
part #: 02.002.1
Rubber joystick boot for MO and M2 industrial joysticks.
Aluminum Mounting Plate (VNSO)
part #: 03.002
Aluminum mounting plate for VNSO industrial joysticks.
Standard Contact Block (NSO)
part #: 03.016
Standard double pole contact block for NSO model joysticks and controllers.
Standard Rubber Joystick Boot (VNSO, XL-VNSO, & VCSO)
part #: 03.031
Rubber boot for VNSO, XL-VNSO, VCSO, and CS1 joysticks.
Medium Light Return Spring (VNSO)
part #: 03.039
Medium light return spring for VNSO and XL-VNSO joysticks.
Medium Return Spring (VNSO & PRO)
part #: 03.039.2
Medium return spring for VNSO, XL-VNSO, PRO-4, PRO-5 and PRO-6 joysticks.
Heavy Return Spring (VNSO & PRO)
part #: 03.039.3
Heavy return spring for VNSO, XL-VNSO, PRO-4, PRO-5 and PRO-6 joysticks.
Auxiliary Push Button Contact (VNSO)
part #: 03.061
Auxiliary push button contact with 1 NO and 1 NC contact
Gold Contact Block (NSO)
part #: 03.076
Gold (low voltage) double pole contact block for NSO model joysticks and controllers.
Spring Return Female Guide (VNSO & PRO)
part #: 03.125
Spring return guide (female) for VNSO, PRO-4, PRO-5 & PRO-6 joysticks.
Spring Return Male Guide (VNSO & PRO)
part #: 03.147
Spring return guide (male) for VNSO, PRO-4, PRO-5 & PRO-6 joysticks.
FG-1 / FG-2 / MG25 Rubber Joystick Boot (VNSO)
part #: 03.166
Rubber boot for FG1, FG2, and MG25 handles.
Plastic Snap-On Nameplate
part #: 03.202.2
Plastic snap-on nameplate for VCSO and VNSO industrial joysticks.
Leather Joystick Boot (VNSO & VCSO)
part #: 03.250
Leather joystick boot for VNSO and VCSO joysticks.
Friction Brake Boot (VNSO, VCSO, VCS2 & CS1)
part #: 03.283
Rubber boot for joysticks with friction brake operation.
Plastic Mounting Plate w/ Gasket
part #: 03.747
Plastic mounting plate with gasket for VNSO, XL-VNSO, and VCSO joysticks.
Return Spring Replacement Pliers
part #: 03.773
Pliers for conducting return spring replacements in the field.
FG-3 Rubber Joystick Boot (VNSO, XL-VNSO & VCSO)
part #: 03.817
Rubber joystick boot for VNSO. XL-VNSO and VCSO joysticks with FG-3 handles.
FG-3 Rubber Friction Brake Boot (VNSO, VCSO & CS1)
part #: 03.876
Friction brake joystick boot for VNSO, VCSO, and CS1 joysticks with FG-3 handles.
DGO-2 Transformer (220V/50V)
part #: 04.025
Rotary inductive transformer with 220V (primary) and 50V (secondary).
DGO-3 Transformer (110/30v/30v)
part #: 04.030
DGO-03 rotary inductive transformer (110V/30V/30V) that's designed for applications that require the transmission of an AC signal.
PEC 10K 4-Wire Potentiometer & Board
part #: 04.480
10K 4-wire PEC potentiometer and board (wired & installed).
PEC 5K 4-Wire Potentiometer & Board
part #: 04.481
5K 4-wire PEC potentiometer and board (wired & installed).
PD550-S497 5K-0-5K Potentiometer
part #: 04.651
Center tapped, wire wound 4-wire 5K-0-5K potentiometer.
OEL8G-K 8 Bit Gray Code Encoder
part #: 04.770
OEL8G-K 8 bit gray code encoder for VNSO, VNS2, and NSO-SFA controllers. (OGR8G-M1)
10k 4-wire potentiometer & board
part #: 04.821
10K 4-wire potentiometer and board (wired & installed).
5K 3-Wire Potentiometer & Board
part #: 04.836
5K 3-wire potentiometer and board (wired & installed).
ESS 420 | 4-20 mA 2 Wire Transmitter
part #: 05.317
ESS420 4-20 mA transmitter (2-wire circuit) that acts a self powered control card.
Rubber Joystick Boot (VNS2 / VNSB2)
part #: 06.003
Rubber joystick boot for VNS2 and VNSB2 industrial joysticks.
AC Contact Block
part #: 06.042
AC contact block for NS2 model joysticks, controllers, and rotary switches.
DC Contact Block
part #: 06.043
DC contact block for NSB2 model joysticks, controllers, and rotary switches.
Hollow Joystick Shaft (NS2)
part #: 06.214
8 inch joystick shaft for NS2 model joysticks and controllers.
Flex Shaft (VNS2 / VNSB2)
part #: 06.236
Standard flex shaft and spring for VNS2 / VNSB2 industrial joysticks.
Ball Handle (PRO-4 & PRO-6)
part #: 14.053
1 1/4" round ball handle for PRO-4 and Pro-6 controllers.
Spring Return Roller (PRO)
part #: 14.246
Roller for spring return assembly in PRO-4, PRO-5, and PRO-6 controllers.
FG-4 / FG-5 / FG-6 Rubber Boot (VNSO, XL-VNSO, VCSO, & CS1)
part #: 17.096
Rubber boot for joysticks configured with FG-4, FG-5, and FG-6 handles.
Brass Boot Bushing
part #: 18.110
Brass boot bushing (9 mm) for VNSO, XL-VNSO, VCSO, VCS2 and CS1 joysticks.
5 1/2" Flex Shaft (VNSO)
part #: 30.007
5 1/2" flex shaft and spring for VNSO (E, V, & G) joysticks.
Adapter / Mounting Plate (NSO)
part #: 30.180
Contact drive adapter plate for VNSO and NSO-SFA controllers.