To support our expansive range of industrial joysticks and controllers, we offer a variety of spare and replacement parts available for purchase online. From boots to contact blocks, critical joystick components have been made accessible on this store to ensure you can find and purchase the replacement parts that you need. Contact our customer service team if you need support or guidance with choosing the correct part.
DGO-3 Transformer (110/30v/30v)
part #: 04.030
DGO-03 rotary inductive transformer (110V/30V/30V) that's designed for applications that require the transmission of an AC signal.
DGO-2 Transformer (220V/50V)
part #: 04.025
Rotary inductive transformer with 220V (primary) and 50V (secondary).
OEL8G-K 8 Bit Gray Code Encoder
part #: 04.770
OEL8G-K 8 bit gray code encoder for VNSO, VNS2, and NSO-SFA controllers. (OGR8G-M1)
PD550-S497 5K-0-5K Potentiometer
part #: 04.651
Center tapped, wire wound 4-wire 5K-0-5K potentiometer.
10k 4-wire potentiometer & board
part #: 04.821
10K 4-wire potentiometer and board (wired & installed).
PEC 10K 4-Wire Potentiometer & Board
part #: 04.480
10K 4-wire PEC potentiometer and board (wired & installed).
PEC 5K 4-Wire Potentiometer & Board
part #: 04.481
5K 4-wire PEC potentiometer and board (wired & installed).
ESS 420 | 4-20 mA 2 Wire Transmitter
part #: 05.317
ESS420 4-20 mA transmitter (2-wire circuit) that acts a self powered control card.
5K 3-Wire Potentiometer & Board
part #: 04.836
5K 3-wire potentiometer and board (wired & installed).
Leather Joystick Boot (VNSO & VCSO)
part #: 03.250
Leather joystick boot for VNSO and VCSO joysticks.
Return Spring Replacement Pliers
part #: 03.773
Pliers for conducting return spring replacements in the field.
Gold Contact Block (NSO)
part #: 03.076
Gold (low voltage) double pole contact block for NSO model joysticks and controllers.
Auxiliary Push Button Contact (VNSO)
part #: 03.061
Auxiliary push button contact with 1 NO and 1 NC contact
Standard Contact Block (NSO)
part #: 03.016
Standard double pole contact block for NSO model joysticks and controllers.
5 1/2" Flex Shaft (VNSO)
part #: 30.007
5 1/2" flex shaft and spring for VNSO (E, V, & G) joysticks.
Adapter / Mounting Plate (NSO)
part #: 30.180
Contact drive adapter plate for VNSO and NSO-SFA controllers.
FG-1 / FG-2 / MG25 Rubber Joystick Boot (VNSO)
part #: 03.166
Rubber boot for FG1, FG2, and MG25 handles.
Plastic Mounting Plate w/ Gasket
part #: 03.747
Plastic mounting plate with gasket for VNSO, XL-VNSO, and VCSO joysticks.
FG-4 / FG-5 / FG-6 Rubber Boot (VNSO, XL-VNSO, VCSO, & CS1)
part #: 17.096
Rubber boot for joysticks configured with FG-4, FG-5, and FG-6 handles.
FG-3 Rubber Joystick Boot (VNSO, XL-VNSO & VCSO)
part #: 03.817
Rubber joystick boot for VNSO. XL-VNSO and VCSO joysticks with FG-3 handles.
Standard Rubber Joystick Boot (VNSO, XL-VNSO, & VCSO)
part #: 03.031
Rubber boot for VNSO, XL-VNSO, VCSO, and CS1 joysticks.
Friction Brake Boot (VNSO, VCSO, VCS2 & CS1)
part #: 03.283
Rubber boot for joysticks with friction brake operation.
FG-3 Rubber Friction Brake Boot (VNSO, VCSO & CS1)
part #: 03.876
Friction brake joystick boot for VNSO, VCSO, and CS1 joysticks with FG-3 handles.
Plastic Snap-On Nameplate
part #: 03.202.2
Plastic snap-on nameplate for VCSO and VNSO industrial joysticks.
Aluminum Mounting Plate (VNSO)
part #: 03.002
Aluminum mounting plate for VNSO industrial joysticks.
Flush Push Button Handle Cap
part #: 01.071
Handle cap for flush push button HD handle configurations
Recessed Push Button Handle Cap
part #: 01.071.1
Handle cap for recessed push button HDV handle configurations.
Brass Sealing Ring
part #: 01.070
Brass sealing ring for flush/recessed push button standard handles.