To support our expansive range of industrial joysticks and controllers, we offer a variety of spare and replacement parts available for purchase online. From boots to contact blocks, critical joystick components have been made accessible on this store to ensure you can find and purchase the replacement parts that you need. Contact our customer service team if you need support or guidance with choosing the correct part.
10k 4-wire potentiometer & board
part #: 04.821
10K 4-wire potentiometer and board (wired & installed).
5 1/2" Flex Shaft (VNSO)
part #: 30.007
5 1/2" flex shaft and spring for VNSO (E, V, & G) joysticks.
5K 3-Wire Potentiometer & Board
part #: 04.836
5K 3-wire potentiometer and board (wired & installed).
Adapter / Mounting Plate (NSO)
part #: 30.180
Contact drive adapter plate for VNSO and NSO-SFA controllers.
Aluminum Mounting Plate (VNSO)
part #: 03.002
Aluminum mounting plate for VNSO industrial joysticks.
Auxiliary Push Button Contact (VNSO)
part #: 03.061
Auxiliary push button contact with 1 NO and 1 NC contact
Brass Boot Bushing
part #: 18.110
Brass boot bushing (9 mm) for VNSO, XL-VNSO, VCSO, VCS2 and CS1 joysticks.
Brass Sealing Ring
part #: 01.070
Brass sealing ring for flush/recessed push button standard handles.
DGO-2 Transformer (220V/50V)
part #: 04.025
Rotary inductive transformer with 220V (primary) and 50V (secondary).
DGO-3 Transformer (110/30v/30v)
part #: 04.030
DGO-03 rotary inductive transformer (110V/30V/30V) that's designed for applications that require the transmission of an AC signal.
ESS 420 | 4-20 mA 2 Wire Transmitter
part #: 05.317
ESS420 4-20 mA transmitter (2-wire circuit) that acts a self powered control card.
Extended Push Button Actuator
part #: 01.073
Actuator for standard extended push button handle configurations.
FG-1 / FG-2 / MG25 Rubber Joystick Boot (VNSO)
part #: 03.166
Rubber boot for FG1, FG2, and MG25 handles.
FG-3 Rubber Friction Brake Boot (VNSO, VCSO & CS1)
part #: 03.876
Friction brake joystick boot for VNSO, VCSO, and CS1 joysticks with FG-3 handles.
FG-3 Rubber Joystick Boot (VNSO, XL-VNSO & VCSO)
part #: 03.817
Rubber joystick boot for VNSO. XL-VNSO and VCSO joysticks with FG-3 handles.
FG-4 / FG-5 / FG-6 Rubber Boot (VNSO, XL-VNSO, VCSO, & CS1)
part #: 17.096
Rubber boot for joysticks configured with FG-4, FG-5, and FG-6 handles.
Flush Push Button Handle Cap
part #: 01.071
Handle cap for flush push button HD handle configurations
Friction Brake Boot (VNSO, VCSO, VCS2 & CS1)
part #: 03.283
Rubber boot for joysticks with friction brake operation.
Gold Contact Block (NSO)
part #: 03.076
Gold (low voltage) double pole contact block for NSO model joysticks and controllers.
Heavy Return Spring (VNSO & PRO)
part #: 03.039.3
Heavy return spring for VNSO, XL-VNSO, PRO-4, PRO-5 and PRO-6 joysticks.
Leather Joystick Boot (VNSO & VCSO)
part #: 03.250
Leather joystick boot for VNSO and VCSO joysticks.
Medium Light Return Spring (VNSO)
part #: 03.039
Medium light return spring for VNSO and XL-VNSO joysticks.
Medium Return Spring (VNSO & PRO)
part #: 03.039.2
Medium return spring for VNSO, XL-VNSO, PRO-4, PRO-5 and PRO-6 joysticks.
OEL8G-K 8 Bit Gray Code Encoder
part #: 04.770
OEL8G-K 8 bit gray code encoder for VNSO, VNS2, and NSO-SFA controllers. (OGR8G-M1)
PD550-S497 5K-0-5K Potentiometer
part #: 04.651
Center tapped, wire wound 4-wire 5K-0-5K potentiometer.
PEC 10K 4-Wire Potentiometer & Board
part #: 04.480
10K 4-wire PEC potentiometer and board (wired & installed).
PEC 5K 4-Wire Potentiometer & Board
part #: 04.481
5K 4-wire PEC potentiometer and board (wired & installed).
Plastic Mounting Plate w/ Gasket
part #: 03.747
Plastic mounting plate with gasket for VNSO, XL-VNSO, and VCSO joysticks.
Plastic Snap-On Nameplate
part #: 03.202.2
Plastic snap-on nameplate for VCSO and VNSO industrial joysticks.
Recessed Push Button Handle Cap
part #: 01.071.1
Handle cap for recessed push button HDV handle configurations.
Return Spring Replacement Pliers
part #: 03.773
Pliers for conducting return spring replacements in the field.
Spring Return Female Guide (VNSO & PRO)
part #: 03.125
Spring return guide (female) for VNSO, PRO-4, PRO-5 & PRO-6 joysticks.
Spring Return Male Guide (VNSO & PRO)
part #: 03.147
Spring return guide (male) for VNSO, PRO-4, PRO-5 & PRO-6 joysticks.
Standard Contact Block (NSO)
part #: 03.016
Standard double pole contact block for NSO model joysticks and controllers.
Standard Push Button Actuator
part #: 01.068
Actuator for standard flush or recessed push button handle configurations.
Standard Rubber Joystick Boot (VNSO, XL-VNSO, & VCSO)
part #: 03.031
Rubber boot for VNSO, XL-VNSO, VCSO, and CS1 joysticks.